| |
Welcome.
 WELCOME TO STRICTLY IMPORT MOTORSPORTS Our purpose here at Strictly Import Motorsports is to offer dedicated, personal service and a positive attitude by putting in the time and effort towards our customers. We make every customer count and take each day as an opportunity to grow and learn as we strive to meet the needs of every customer. 
|
|
|
SIM 4G63 Cylinder head Stage 2
|
|
SIM Race Line 264/272 Cams
|
|
Our Price: $799.00
|
|
|
|
Our Price: $280.00
|
|
|
|
|
|
This is our Custom Built Strictly Import Motorsports Stage 2 4G63 head. These are perfect for our 264's 272's and 275's. These will have Manley Springs, new valve seals, race cut valve/seat grind, new SS valves, and new SBI valve guides. You can always add parts to be added to the head or provide your own. This head is good up to 600 HP and will allow rev's up to 8000 RPMS.
|
This is for a set of new regrinds. they are the 264/272 HKS regrind.
There is a 60 dollar core charge that will need to be added.
|
|
|
|
1G Front Strut bar
|
|
Kelford 270/262 Cams
|
|
Our Price: $150.00
|
|
|
|
Our Price: $590.00
|
|
|
|
|
Custom 1g Front strut bar.
Check this thing out this is all hand made. This is constructed completely out of mild steel its Tig welded. It weighs in at 9 pounds flat. Only information needed is if you are still using the factory battery hold down and location so a stud and nut can be provided.
We can also Powder coat these.
Colors:
Black $50.00
(yellow, orange, kawasaki green) price's varies.
|
270/262 Duration, 11.00mm/10.00mm Lift. Stage 2 high performance camshafts. Suits 350-550hp engine builds. Suits up to 32 lbboost and 9000 RPM with Kelford valve spring.
|
|
|
|
Short block stage 3
|
|
FP BLACK Turbocharger for the Mitsubishi Evolution X
|
|
Our Price: $2,699.00
|
|
|
|
Our Price: $1,999.00
|
|
|
|
|
stage 3 short block that will hold power levels into the 800+hp range. Depending on your balance options and stroke option can rev into the 9k+ range.
Includes:
Hot tanked and inspected
Bored to spec
Torque plate honed
Mating surface decked
Manley platinum series forged pistons
Manley I-beam forged rods
ACL bearings
Eagle Billet Crank
OEM freeze Plugs
Painted
|
The FP BLACK™ for the Mitsubishi Lancer Evolution X is the most fully evolved stock appearing variant we offer. It features an 82mm HTA™ compressor wheel with a flow rate of 68lb/min. The turbine side features a large 67mm turbine wheel.
The turbo comes standard with an 18psi wastegate actuator and our FP Evo X High Flow Oil Supply Line and turbo oil filter. You may select a lower pressure actuator if needed, but the unit is intended to operate above 18psi of boost pressure. This turbocharger will produce 500-600whp results readily on well prepared engines.
This turbo is covered by our 12 month complimentary repair service. You must activate this service within 30 days of purchasing this turbocharger by returning the registration card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, dis-assembly of the turbocharger or running an external wastegate will exclude the turbo from complimentary repair service.
Porting is available for this turbocharger.
|
|
|
|
|
|
Today's Super Deal! |
|
|
|
Stage 1 Short Block
|
|
Our Price: $1,499.00
|
|
|
Stage 1 short block that will hold power levels into the 450hp range. Depending on your balance options and stroke option can rev into the 9k range.
Includes:
Hot tanked and inspected
Bored to spec
Torque plate honed
Mating surface decked
NPR/ITM Pistons and Rings
OEM Rods with ARP Rod bolts
ACL bearings
OEM crank(micro-polished)
OEM freeze Plugs
Painted
|
|
|
|
 |
|
